Sailing - Rigging

32mm Pin Genoa Car Track Pin Stop Standard Duty - BlackBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Trac...

Size 2 4:1 Vang System, Swivel HeadUpgrade your existing Vang system or use it as a boom preventer. Snap shackle fixings allow for quick and easy ...

Quick Release Lever - 1/4" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing ...

Double Jaw Rigging Toggle - 1/4" PinLike our normal rigging toggles, these are designed to facilitate toggling action when used with marine eyes a...

Snap Gate Hook - Body Only - 5/16" - 24 Left HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long f...

Snap Gate Hook - Body Only - 5/16" - 24 Right HandFor those that wish to replace their existing hooks- just match up the thread size. 3-1/2" long ...

"T" Style Toggle Jaw for 3/16" WireGenerally used at the stern rail when no gate is required with a turnbuckle forward.

Wrap Pins Hook & Loop Pin Locking Devices for Open Body Turnbuckles 1/4" - 2-PackWrap Pins are neat hook and loop locking devices used to secu...

Pulpit Anchor for 1" RailThis fitting can be used on the stern rail and bow pulpit to terminate jaw fittings for lower or upper life lines. (1/2" ...

Jaw/Jaw Tubular Turnbuckle T ToggleFor those who prefer a traditional body turnbuckle. The forged silicon bronze body, coupled with our integral t...

T-Track Stainless Steel Slider 1" x 1/8" LinedSpecifications: Track Size 1" x 1/8" (25 mm x 3 mm) Max. Boat Length-  27 feet (8 m) Max. Boat Weigh...

Rigging Toggle - 5/16" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also ...

Quick Release Shroud Adjuster - 1/4" PinDeveloped for dry-sailed one-design dinghies. When the quick-release pin is pulled, easy adjustment can be...

Rigging Toggle - 1/4" PinThese stainless steel rigging toggles are essential to prevent the misalignment of rigid jaw turnbuckles. They are also u...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. She...

Splice Eye with Threaded Stud: 5/16"-24 x 2-1/2" RH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. Sh...

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Add-A-CleatA versatile cleat easily mounts to a stanchion or rail 7/8" and 1" diameter ( will accommodate larger sizes with longer clamp). Constru...

Quick Release Lever - 5/16" PinThe Johnson Hyfield-type lever has several very practical features that have been developed after extensive testing...

Splice Eye with Threaded Stud: 1/4"-28 x 2-1/2" LH with Splice EyeIncludes cross-hole for cotter pin*Dyneema Line not included with fittingsC. She...

Single Swivel Gate Eye for 3/16" WireA single eye is used on one end of the gate area to attach the gate hook.

Boomstrut - Black for Boats Up To 20'Boomstrut 44011 is designed for boats up to 6m (20ft) in length with a maximum boom tip weight of 6.3kg (14 l...

32mm Towable Genoa Car 2:1 PurchaseBarton Marine introduces its new sleek range of Genoa designed to run on 32mm (1 ¼”) T Track. All are manufactu...

Small Furling Drum - 2.99"Drums are molded from glass fiber reinforced nylon with stainless steel swivel and ball bearing assemblies. Furling drum...